Wednesday, October 14, 2015

How to Clean Air Purifiers

HEPA filter is short form for high efficiency particulate air filter. It was designed to capture very small airborne particles - dust, moles, bacteria, virus, etc - that are not usually captured by other standard air filters. The filter can capture these particles and prevent you from having allergies, asthma, and other health problems.

HEPA filter can significantly improve the quality of the air in your living rooms, kitchen, and bedrooms. In order to keep it working for a long time, probably more than 1 years, you need to frequently clean HEPA filters.

This article is going to show few simple steps that you can take to clean the HEPA filter in a matter of minutes and maintain its efficiency for a long period of time.

But before that, let us tell you what you need to begin.

You will need trashcan, can of compressed air, garden hose, and water supply.

And here is how to clean your HEPA filter:

Step 1:  Turn off your air purifier and unplug it from the power supply outlet. Unfasten the clips on the side of the unit to open the air cleaner. You should see the HEPA filter inside.

Step 2: Remove the filter by taking out of the HEPA air purifier. Take the filter somewhere else, probably in the next room to clean it properly.

Step 3: Lay the filter on top of a trashcan and using the compressed air blow out any loose dust that has accumulated on the filter. Clean both sides of the filter by turning it over and switching it back and forth until you are certain all dust are removed.

Step 4: Turn on the water supply and clean the HEPA filter. Spray the water gently over the filter using a garden hose. Moderate the force of the spray by pressing your thumb over the end of the hose. Be careful not to damage the filter with excess force of the spray.

Step 5: Place the filter leaning against the wall in a shadowy area where wind can blow through to both sides of it. Leave the filter there for few hours to let it completely dry.

Step 6: Finally, place the HEPA filter back in the air purifier once it is dry. Slide it back in place and close the lids on the unit. Plug the electricity cord of the air purifier back in and switch it on to ensure that it is working properly.

Tips: Do not expose the filter in direct sunlight or lay it flat on the ground to avoid damage to it.

We would like to hear from you.

Tell us if you know any tips on how to clean HEPA filter in the comment box below!

Looking for best air purifiers? Click here to read air purifier reviews...

No comments:

Post a Comment